NCS Pool Deck with Granite Deck Finish

  Points of Interest:
♦ Cool under foot
♦ Installs Quickly
♦ Slip Resistant
♦ Multiple Colors
View Colors & Textures

►Pool Decks
►Walk Ways
►Spa Deck
►Commercial Walk Ways.
►Court Yards
►Privacy Decks
►Balcony Decks
►Cosmetic Overlays
►Restraunts
► Commercial Kitchens
►Roof Coatings
►Green Roof Systems

  Two Component 100 % Polyurea that achieves excellent UV stability (colorfast) with superior performance in industrial, commercial and residential environments.
NCS displays extremely fast cure times with incredible adhesion to a multitude of substrates.
NCS Systems can be applied in conditions often seen as detrimental to traditional coatings, from temperatures as low as 20degrees to over 120 degrees Fahrenheit.
NCS conforms and complies with USDA and FDA guidelines for incidental food contact and is moisture insensitive.


  • Description
  • Tech Info
  • Installation
  • Adhesion Results
  • Coverage
  • Material Safety
  • Chem Resistance
Types of Construction:

NCS Granite Deck & Waterproof Membrane

NCS Granite Deck is a uniquely blended polymer system designed to install
quickly with rapid drying, thus providing for waterproofing within 30 minutes and
a complete deck surface within two hours. NCS Granite Deck is formulated in
100% solid solution for the membrane and solution of specially blended UVstabilized
Polyurea Resins and acrylic aggregates which result in a water tight and
beautifully finished granite look.

Once NCS Granite Deck is dry to the touch, usually within 2 or 3 hours, the surface
can be walked on. without negatively affecting the integrity of the membrane.
NCS Granite Deck is installed by spraying the membrane, roller or brushing.

NCS Granite Deck is installed in thicknesses of 75 mils to as much as 125 mils
(please contact NCS for design specifications). NCS Granite Deck is available in a
variety of colors to match most color schemes.

NCS Granite Deck is warranted to be free from manufacturing defects for a period
of 10 years. Project specific warranties can be obtained by contacting NCS
representatives or approved applicators.
Technical:
 
Tensile (PSI) ASTM D412
3310
Elongation (%) ASTM D412
370
Tear (PLI) ASTM 2240
300
Hardness Shore D
360
Taber Abrasion (mg loss)
ASTM D4060
85
CS 17 Wheel   1 kg per 1000
Adhesion ASTM D4541
Concrete (unprimed)
>325 psi
Concrete (primed)
>500 psi
Wood (unprimed)
>250 psi
Steel (unprimed)
>450 psi
Steel (primed)
>920 psi
   
Typical Processing Properties
Gel Time 60 Seconds
Tack Free 20 Minutes
Open to foot traffic 60 Minutes
Open to Vehicle /Industry 8 Hours

Equipment
Plural Spray Ratio 1-1
Temperature 125-150 Fahrenheit
Spray Pressure 2000 psi
clock
Technical:
 
Tensile (PSI) ASTM D412
2732
Elongation (%) ASTM D412
360
Tear (PLI) ASTM 2240
200
Hardness Shore D
360
Taber Abrasion (mg loss)
ASTM D4060
80
CS 17 Wheel   1 kg per 1000
Adhesion ASTM D4541
Concrete (unprimed)
>400 psi
Concrete (primed)
>800 psi
Wood (unprimed)
>250 psi
Steel (unprimed)
>250 psi
Steel (primed)
>400 psi
   
Typical Processing Properties
Gel Time 30 Minutes
Tack Free 1 Hour
Open to foot traffic 3 Hours avg
Open to Vehicle /Industry 24 Hours
Equipment
Air Compressor and Hopper Gun
Temperature 45 - 110 Fahrenheit
Spray Pressure 100 psi max
clock
Adhesion Results ASTM D-4541 Elcometer

Concrete (No Primer) >325 psi Concrete Failure
Concrete (Epoxy Primer) >500 psi Concrete Failure
Steel (No Primer) >450 psi Substrate Failure
Steel (Epoxy Primer) >920 psi Primer Failure
Wood (No Primer) >250 psi Delamination
NCS Primer + 289

Shelf Life 6 Months (60-100 Degree Fahrenheit
Coating S.F. /Gal
20 mils 70
30 mils 48
40 mils 36
50 mils 29
60 mils 24
80 mils 18
100 mils 14
250 mils 5.5
For information on solvents that can be used with 6000-UVS contact: info@NevadaCoatings.com
NCS (Nex-Amine) 6000-B

1. Product and Company Identification
Product Name: NCS (NexAmine) 6000-B
Chemical Family: Aspartic Ester

2. Hazards Identification
Emergency Overview
CAUTION!     Color: Yellow     Form: Liquid     Odor: Slight.
Toxic gases/fumes are given off during burning or thermal decomposition and may cause allergic skin and respiratory reaction. Use cold water spray to cool fire-exposed containers to minimize the risk of rupture. May cause
respiratory tract irritation.

Potential Health Effects
Primary Routes of Entry: Skin Contact, Eye Contact, Ingestion, Inhalation

Medical Conditions Aggravated by Exposure:
Skin disorders, Respiratory disorders, Eye disorders

HUMAN EFFECTS AND SYMPTOMS OF OVER EXPOSURE
Inhalation-Acute Inhalation
Inhalation is unlikely due to the low vapor pressure. If misted or handled at elevated temperatures, high concentrations
may cause respiratory tract irritation.

Skin-Acute Skin
Based on materials with similar chemical structures Not expected to be irritating. Not expected to be a skin sensitizer.

Eye-Acute Eye
Based on materials with similar chemical structures Not expected to be irritating.

Ingestion-Acute Ingestion
For Component: Aliphatic Carboxylic Ester
May be harmful if swallowed.

General Effects of Exposure-Chronic Effects of Exposure
No applicable information was found concerning any adverse chronic health effects from overexposure to
this product. Repeated or prolonged overexposure may cause effects as noted under acute health effects.

Carcinogenicity:
No Carcinogenic substances as defined by IARC, NTP and/or OSHA

3. Composition/Information on Ingredients
Hazardous Components
Weight % Components CAS-No.
1 - 5% Aliphatic Carboxylic Ester 623-91-6

4. First Aid Measures
Eye Contact
In case of contact, flush eyes with plenty of lukewarm water. Get medical attention if irritation develops.

Skin Contact

In case of skin contact, wash affected areas with soap and water. Immediately remove contaminated clothing and shoes. Get medical attention if irritation develops.

Inhalation
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention if irritation develops.

Ingestion
Do not induce vomiting. If conscious, give 2 glasses of water. Get immediate medical attention.

5. Fire-Fighting Measures
Suitable Extinguishing Media: All extinguishing media are suitable.
Special Fire Fighting Procedures: Firefighters should be equipped with self-contained breathing apparatus to protect against potentially toxic and irritating fumes. Use cold water spray to cool fire-exposed containers to
minimize risk of rupture.

Unusual Fire/Explosion Hazards:
Toxic and irritating gases/fumes may be given off during burning or thermal decomposition.

6. Accidental Release Measures
Spill and Leak Procedures: Cleanup personnel must use appropriate personal protective equipment. Cover spill with inert material (e.g., dry sand or earth) and collect for proper disposal. Prevent from entering open drains and waterways.

Evacuate and keep unnecessary people out of spill area. Ventilate area to remove vapors or dust.

7. Handling and Storage
Storage Temperature:
minimum: 0 °C (32 °F)
maximum: 50 °C (122 °F)

Storage Period:
6 Months @ 25 °C (77 °F)
Handling/Storage Precautions: Avoid contact with skin or clothing. Avoid contact with eyes. Use only with adequate ventilation/personal protection. Wash thoroughly after handling. Keep container closed when not in use. Do not breathe vapors or spray mist. Store in a dry place away from excessive heat. Material is hygroscopic and may absorb small amounts of atmospheric moisture.

Further Info on Storage Conditions: Avoid contact with moisture/water. Material can be stored safely at am-


8. Exposure Controls / Personal Protection
Country specific exposure limits have not been established or are not applicable.

Industrial Hygiene/Ventilation Measures
General dilution and local exhaust as necessary to control airborne vapors, mists, dusts and thermal decomposition products below appropriate airborne concentration standards/guidelines. Curing ovens must be ventilated to prevent the build up of explosive atmospheres and to prevent off gases from entering the work place.

Respiratory Protection
In spray applications, an organic vapor/particulate respirator or air supplied unit is necessary., The use of a positive pressure supplied air respirator is recommended if the airborne concentration is unknown or if spraying is
performed in a confined space or area with limited ventilation.

Hand Protection
Permeation resistant gloves.

Eye Protection
Chemical safety goggles or safety glasses with side-shields.

Skin and body protection
Wear cloth work clothing including long pants and long-sleeved shirts.

Additional Protective Measures
Employees should wash their hands and face before eating, drinking, or using tobacco products. Educate and train employees in the safe use and handling of this product. Emergency showers and eye wash stations should
be available.

9. Physical and Chemical Properties
Form: Liquid         Color: Yellow
Odor: Slight           PH: Not Established
Freezing Point: Not Established    Boiling Point/Range: Not Established
Flash Point: > 93.33 °C (> 200 °F) (PMCC -ASTM D-93))
Lower Explosion Limit: Not Established
Upper Explosion Limit: Not Established
Vapor Pressure: < 0.000007 mmHg @ 25 °C
Density: 1.07 g/cm3       Solubility in Water: Insoluble
Auto-ignition Temperature: Not Established
VOC Content: Not Established
Viscosity, Dynamic: no data available
Bulk Density: 8.89 lb/gal Hygroscopicity

10. Stability and Reactivity
Hazardous Reactions: Hazardous polymerization does not occur.
Stability: Stable
Materials to avoid: Oxidizing agents
Conditions to avoid: Avoid extreme heat.
Hazardous decomposition products: By Fire and Thermal Decomposition: Carbon oxides, nitrogen oxides (NOx), Amines, other aliphatic fragments which have not been determined, Ammonia gas may be liberated at

11. Toxicological Information
Toxicity Data for Aspartic Ester
Acute Oral Toxicity: LD50: > 2,000 mg/kg (Rat)
Acute Inhalation Toxicity: LC50: 4923 mg/m3, aerosol, 4 h (Rat)
Skin Irritation: rabbit, Non-irritating
Eye Irritation: rabbit, Non-irritating
Sensitization: Maximization Test (GPMT): non-sensitizer (Guinea pig) Mutagenicity
Genetic Toxicity in Vitro: Ames: negative (Salmonella typhimurium)
Toxicity Data for Aliphatic Carboxylic Ester
Acute Oral Toxicity: LD50: 1,780 mg/kg (Rat)

12. Ecological Information
Ecological Data for Aspartic Ester
Biodegradation: 30 %, Exposure time: 28 d, Not readily biodegradable.
Acute and Prolonged Toxicity to Fish: LC0: > 87 mg/l (Zebra fish (Brachydanio rerio), 96 h)
Acute Toxicity to Aquatic Invertebrates: EC0: 96.8 mg/l (Water flea (Daphnia magna), 48 h)
Toxicity to Aquatic Plants: EC50: > 41.2 - < 84.2 mg/l, (Green algae (Scenedesmus subspicatus), 72 h)
Toxicity to Microorganisms: EC50: > 10,000 mg/l, (Other bacteria)
Ecological Data for Aliphatic Carboxylic Ester
Acute and Prolonged Toxicity to Fish: 38 mg/l (Fathead minnow (Pimephales promelas), 96 h)

13. Disposal Considerations
Waste Disposal Method: Waste disposal should be in accordance with existing federal, state and local environmental control laws.
Empty Container Precautions: Recondition or dispose of empty container in accordance with governmental regulations. Do not reuse empty container without proper cleaning. Empty containers retain product residue
(dust, liquid, vapor and/or gases) and can be dangerous. Do not heat or cut container with electric or gas torch.

14. Transportation information

Land transport (DOT)
Non-Regulated
Sea transport (IMDG)
Non-Regulated
Air transport (ICAO/IATA)
Non-Regulated

15. Regulatory Information
United States Federal Regulations
OSHA Hazcom Standard Rating: Hazardous
US. Toxic Substances Control Act: Listed on the TSCA Inventory.
US. EPA CERCLA Hazardous Substances (40 CFR 302):

Components-None

SARA Section 311/312 Hazard Categories:

Acute Health Hazard
US. EPA Emergency Planning and Community Right-To-Know Act (EPCRA) SARA Title III
Section 302 Extremely Hazardous Substance (40 CFR 355, Appendix A):

Components-None
US. EPA Emergency Planning and Community Right-To-Know Act (EPCRA) SARA Title III
Section 313 Toxic Chemicals (40 CFR 372.65) - Supplier Notification Required:

Components-None
US. EPA Resource Conservation and Recovery Act (RCRA) Composite List of Hazardous Wastes and Appendix VIII Hazardous Constituents (40 CFR 261): If discarded in its purchased form, this product would not be a hazardous waste either by listing or by characteristic. However, under RCRA, it is the responsibility of the product user to determine at the time of disposal, whether a material containing the product or derived from the product should be classified as a hazardous waste. (40 CFR 261.20-24)

State Right-To-Know Information
The following chemicals are specifically listed by individual states; other product specific health and safety data in other sections of the MSDS may also be applicable for state requirements. For details on your regulatory requirements you should contact the appropriate agency in your state.
Massachusetts, New Jersey or Pennsylvania Right to Know Substance Lists:

Weight % Components CAS-No.
>=1% Aspartic Ester CAS# is a trade secret
1 - 5% Aliphatic Carboxylic Ester 623-91-6

California Prop. 65:
To the best of our knowledge, this product does not contain any of the listed chemicals, which the state of California has found to cause cancer, birth defects or other reproductive harm.

16. Other Information
NFPA 704M Rating
HMIS RATINGS:
HEALTH - 2
FLAMMABILITY - 1
REACTIVITY - 1


0 =Minimal 1=Slight 2=Moderate 3=Serious 4=Severe

This information is furnished without warranty, express or implied. This information is believed to be accurate
to the best knowledge of ReactAmine Technology, LLC. The information in this MSDS relates only to the specific
material designated herein. ReactAmine Technology, LLC assumes no legal responsibility for use of or reliance
upon the information in this MSDS.

CONTACT:
An Amber Chemical Company
ReactAmine Technology, LLC 420 Gees Mill Business Court Phone 770.483.0480 Conyers, Georgia 30013
Phone 770.483.0480 www.reactamine.com / An Amber Chemical Company